3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? compact header .100 .075 right angle 502 series physical electrical environmental insulation material: glass filled polyester (pbt) flammability: ul 94v-0 color: gray contact material: copper alloy plating underplating: 2.03 m [ 80 ? ] nickel wiping area: 0.30 m [ 12 ? ] gold solder tails: gold flash marking: 3m logo, part identification number and orientation triangle current rating: 1 a insulation resistance: > 1 10 9 at 500 v dc withstanding voltage: 1000 v rms at sea level temperature rating: -40 c to +85 c process rating: maximum molded insulator temperature 191c (solder wave process only) ts-0300-b sheet 1 of 2 ? low profile ? consumes less vertical space ? economy in system layouts ? uses standard 2.54 [.1 ] 2.54 [.1 ] pc board hole pattern ? retro-fit without print changes ? mates with 501 series wiremount socket ? see regulatory informa tion appendix (ria) for chemical complia nce information date modified: august 28, 2007 ul file no.: e68080
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? compact header .100 .075 right angle 502 series pin quantity dimension a b 16 31.2 [1.23] 28.7 [1.13] 20 35.8 [1.41] 33.6 [1.31] 26 43.9 [1.73] 41.4 [1.63] 34 54.1 [2.13] 51.4 [2.02] 40 61.7 [2.43] 58.9 [2.32] 44 66.8 [2.63] 64.0 [2.52] 50 74.4 [2.93] 71.6 [2.82] ts-0300-b sheet 2 of 2 ordering information 502xx-b002pl pin quantity: see table socket retention latch (order separately) 3785-2 notes: 1.socket retention latch operational on 16, 20 and 50 pin headers only. 2.no retention latch on positions 26, 34, 40 and 44 pin headers. 25.4 [1.08] 3.0 [.12] 13.0 [.51] 11.4 [.45] 5,3 [.21] 3.6 [.14] 1.40 [.055] socket retention latch material: gray polyester (pbt) w/o strain relief (see note 1) 9.9 max [.39] to edge of pc for daisy chain ?0.9 [.035 .002] 2.79 [.110] 2.54 [.100] position 1 ?1.65 [.065] .100 [2.54] recommended mounting hole pattern no latch catch (see note 2) 2.8 [.11] 1.27 [.05] b 2.54 [.100] 1.905 [.0750] position 1 0.60 [.024] 0.51 [.020] 1.5 [.06] 4.90 [.193] 0.38 [.015] a 6.6 [.26] 0.51 [.020] 2x latch catch (see note 1) 3.8 [.15] position 1 orientation triangle 2x ? 1.63 [.064] 0.38 [.015] 6.4 [.25] 13.2 [.52] 2.8 [.11] position 2 2.54 [.100] for recommended 3m mating connectors refer to ts-2203 5.00 [.197] mm [inch] mm tolerance unless noted [ ] dimensions for reference only .15 .3 .000 .00 .0 (ria e1 & c1 apply)
regulatory information appendix 3m electronic solutions division/interconnect europe appendix e1: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product is rohs compliant 2005/95/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e2: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/747/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e3: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment as amended by commission decision 2005/618/ec. this product contains lead in the solder tail area in excess of the maximum concentration value allowed . unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e4: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains decabde in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/17/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. ria-2217b-b
china appendix c1: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix c2: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product warranty. the product warranty is stated below. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the product warranty stated below. important notice ll tatement tecnical inormation and recommendation related to prodct are baed on inormation belieed to be reliable bt te accracy or completene i not aranteed. eore in ti prodct yo mt ealate it and determine i it i itable or yor intended application. o ame all ri and liability aociated it c e. ny tatement related to te prodct ic are not contained in crrent pblication or any contrary tatement contained on yor prcae order all ae no orce or eect nle eprely areed pon in ritin by an atoried ocer o . warranty; limited remedy; limited liability. i prodct ill be ree rom deect in material and manactre or a period o one year rom te time o prcae. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defectie within the warranty period stated aboe, your exclusie remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. please recycle. printed in usa. 3m . all rights resered. riabb 3 3m electronics interconnect products rier place bld. austin, t u.s.a. 33 3m is a trademar of 3m company.
|
